It is not uncommon for furnaces to develop a mind of their own and quit on their owners. But what if this happens to you on a chilly winter night in Albany, IL? Trust us when we say that such a night will be better imagined than experienced. That is why you have to get on with repairing your furnace before the cold months set in.
Common Signs that Tell You Repairing Your Furnace and Heater is a Need
With that being said, the best way to prevent such unpleasant episodes with your furnace is to take preventive measures to avoid faults. However, when that doesn’t work and the furnace eventually breaks down, you need to respond to the issue with the right solution. And quickly too.
In this article, we will explain some of the tell-tale signs of a faulty furnace or heater and common problems that may occur. We will also provide you with troubleshooting tips on repairing your furnace. Learn more about thermowells, too.
Here are some tell-tale signs that your heater is not working properly:
Some are pretty obvious already.
1. Insufficient heating.
If you notice that your heater is not providing as much heat as you expect it to, then it is possible that the filter is clogged, or it is too small for your space.
2. No heat.
It is one thing for a heater to produce little heat. But if it does heat your space at all, then there may be major issues with the power, thermostat, ignition, or pilot light.
3. Too frequent cycling.
Furnaces cycle on and off when they are in operation. But if your furnace cycles off and on too frequently, then it may be an indication that the thermostat settings are bad, or the filter is clogged.
4. The blower runs continuously.
A blower running continuously is often an indication that something is not right with the heater.
More often than not, you will need expert help like Kelly Heating serving Albany, IL to fix this problem.
5. Furnace makes rattling or rumbling sounds.
Does your furnace make unusual sounds? Something may be off mechanically; especially if it rumbles or rattles.
Common Reasons that Your Furnace and Heater May Break Down
Here are some of the common reasons that your furnace or heater may break down:
1. Poor maintenance
As with most things, a lack of maintenance with your heating unit can lead to several problems.
This is why it is highly recommended that you hire experts to make routine inspections on the heater. These experts will be able to detect faults and prevent damage quickly.
2. Dirty Filters
Filters are designed to collect dust and particles in the air to ensure that the air is as clean as possible. But with frequent use, they will eventually get clogged and reduce airflow.
A clogged filter can also cause the unit to do more work than necessary which may eventually lead to a complete breakdown.
3. Faulty Thermostat
A thermostat is meant to regulate the temperature of the furnace. But if it goes bad, then it will not be able to function optimally.
So, if you notice that the furnace appears to be blowing hotter or colder air than usual, then the thermostat may be damaged.
4. Faulty ignition
A faulty ignition may mean that you will not be able to warm up your room. This may be as a result of a damaged thermocouple or drafts in the furnace.
Visit https://www.thespruce.com/furnace-problem-electric-ignition-4118970 to learn how to troubleshoot a furnace ignitor that will not light.
5. Expected wear and tear
As with most machines, a furnace is prone to wear and tear from frequent use.
This is normal and expected. Nonetheless, wear and tear will affect the efficiency of the heater.
Fixing and Repairing Your Furnace and Heater Problems | Troubleshooting Tips
Here are some solutions you can explore to fix the problems with your heater:
1. Clean or replace your air filter.
To prevent clogged filters which may affect airflow, ensure that you clean or replace the air filter in your unit as often as the manufacturer recommends.
You may also consult a repair expert for more detailed advice.
2. Inspect the Thermostat setting
You may be able to solve the problem with the heater by checking the thermostat. For starters, ensure that it is set to the ‘Automatic’ mode. If it is on ‘Hot’ or ‘Cold’, the heater will run continuously, which may lead to damage.
Also, check the batteries and replace them if they are low.
Click here to learn how often a furnace should cycle.
3. Check the power supply
Does it seem like the heater is no longer working? The problem may not be with the unit.
Check the power source to be sure that all is well. If there is a problem with the source, fix it first. You can also check the circuit breaker to be sure that it has not tripped off.
4. Ensure proper maintenance
Furnaces and heaters last longer when they are properly maintained.
So, ensure that you hire an expert to conduct routine checks and maintenance on yours so that they can detect and fix potential issues early enough.
5. Leave mechanical issues to the experts
In trying to find a solution to the problem, one thing you do not want to do is to make matters worse and void the warranty on the furnace.
To prevent this, ensure that if none of the tips we offered resolves the problem you may be experiencing, get a professional to do the fixing and repair.
They are trained, licensed, and have the wealth of experience to handle most, if not all, the problems you may have with your heater.
Furnaces and heaters are prone to damage and fault caused by poor maintenance or normal wear and tear.
There are a few ways to troubleshoot and fix these problems. However, if none of the common tips work, then it is advisable to call a technician to take a look. Doing this will prevent the chances of causing further damage or voiding the warranty on the unit.